Rubtech Marine Fenders System

Rubber Fenders are designed to prevent boats/ships and the dock from being damaged during the mooring process or during berthing process.


The Fenders are made of high impact resistant extruded rubbers either in EPDM or Natural Rubber. Standard color is black. Coloured fenders are available on request. They have excellent weather resistance, ozone resistance, crack resistance and high abrasion resistance.


The Fenders are available in the following types.

  1. D-Fenders
  2. Cylindrical-Fenders
  3. Arch Fender
  4. Block Fender
  5. Cone Fender
  6. Cell Fender
  7. W & M Fender
  8. Wing Fender
  9. Tug Fender
  10. Composite Fender
  11. Element Fender
  12. Square Fender

Customized Fenders can be manufactured as per client requirement.


The standard length of the Fender is 4 meters.


The Fenders can be fixed horizontally to a wall or mounted in short vertical strips on flat or curved surfaces.

D Fender

D-Fender are d-section profiles which are widely uses as beltings on tugs and other workboats. D fenders can be supplied with either a circular bore for extra wall thickness and durability or a D-bore for securing with a flat bar. All D fenders can be cut to length, drilled, or pre-curved as required.

Cylindrical Fender

Cylindrical Fender have been used for many years for ship and wharf protection. Cylindrical rubber fenders have many advantages. It’s a very robust and simple type of fender which is easy to install. Installation of cylindrical fenders can be simply achieved by using bars, chains or ropes.

Arch Fender

Arch Fender is a traditional V type, and has been popular for many years. Their strong and simple construction suits them to a wide variety of berths and wharves where they will give trouble free service under the most worse conditions. All Arch Fenders have same construction with embedded steel mounting plate vulcanized into base flanges.

Block Fender

Block Fender can be supplied in a wide range of dimensions and shapes(rectangular/square). Therefore this fender is widely used at quays, boats, tugs, barges but also at bridges, locks and other construction environments. The fenders are extruded. All dimensions can be supplied with cylindrical chamber, D-shaped chamber or without chamber. It allows for various attachment methods such as bolts and straps.

Cone Fender

Cone Fenders are the latest generation of cell fender combining excellent energy capacity with low reaction force to give the most efficient performance of any other fender.

Cell Fender

Cell Fender is one of the most proven and reliable fenders ever designed. The large mounting panels helps to distribute the load over the back of the fender panel frame and allows easy installation of the mounting bolts.


W & M Fender

This type of fender is very suitable for application on the bow and stern of tugs, supply vessels and ice breakers. The grooves on the top of the fender gives an extra grip and low pressure while pushing.



Wing Fender

Wing Fenders are used as an alternative for the protection of vessel walls, docks and berths. Wing fenders are generally mounted in a profile and easy to install if replacement is required.